ZyXEL Communications Prestige 2302RL Support Notes page 98

number for SIP.
REGISTER A SIP register server maintains a database of SIP identity-to-IP address
Server (or domain name) mapping. The register server checks your user name
Address and password when you register.
Enter the SIP register server's address in this field.
If you were not given a register server address, then enter the
address from the SIP Server Address field again here.
Enter the SIP register server's listening port for SIP in this field.
REGISTER
Server Port
If you were not given a register server port, then enter the port from
the SIP Server Port field again here.
SIP Service A SIP service domain is the domain name that comes after the @ symbol
Domain in a full SIP URI.
Enter the SIP service domain name in this field. You can use up to 127
ASCII Extended set characters.
Authentication This is the user name for registering this SIP account with the SIP register
User ID server. Type the user name exactly as it was given to you. Use ASCII
characters.
Authentication Type the password associated with the user name above. Use ASCII
Password Extended set characters.
Select this check box to not show identification information when you make
Sending Caller
VoIP calls. Clear this check box to show identification information when
ID
you make VoIP calls.
Phone 1 and Phone 2 correspond to the Prestige's physical PHONE 1
Incoming call
Apply to and 2 ports, respectively. Select whether you want to receive calls for this
SIP account on Phone 1, Phone 2 or both. If you select both, you will not
know which SIP account a call is coming in on.
Click Settings to open a screen where you can configure the Prestige's
Advanced
Settings advanced VoIP settings like SIP server settings, the RTP port range and
the coding type.
Apply Click Apply to save your changes back to the Prestige.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2302RL Support Notes
98