ZyXEL Communications Prestige 2302RL Support Notes page 78

The Prestige supports up to three virtual LAN interfaces on its single physical Ethernet interface. You can
configure the first logical network in SMT menu 3.2. Configure the second and third networks (IP Alias 1 and
IP Alias 2) in SMT Menu 3.2.1 – IP Alias Setup.
The three internal virtual networks are enif0 for the first logical network, enif0:0 for IP alias 1 and enif0:01 for
IP alias 2. Three internal virtual LAN interfaces allow the Prestige to route the packets between the three
networks correctly. When you have configured the three logical networks, the Prestige automatically creates
three internal routes to route packets among the three networks correctly. When you enable DHCP server on the
Prestige, you can configure the client address pool for any of the networks.
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ip ro st
Dest FF Len Interface Gateway
192.168.3.0 00 24 enif0:1
192.168.2.0 00 24 enif0:0
192.168.1.0 00 24 enif0
ras>
To allow or block LAN packets to/from IP alias 1 or 2, apply protocol filters in menu 3.2.1. The filter set(s)
applied in SMT menu 3.1 is for the main logical network (configured in menu 3.2).

IP Alias Setup
1. Configure the first logical network in menu 3.2 by setting the Prestige's LAN IP address.
192.168.3.1
192.168.2.1
192.168.1.1
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2302RL Support Notes
Metric stat Timer Use
1 041b 0 0
1 041b 0 0
1 041b 0 0
78