Block Diagram - Siemens SIMATIC ET 200SP Manual

Wiring

3.2 Block diagram

Note
The first BaseUnit of a station must be a light-colored BaseUnit. Keep this in mind also
during the configuration.
Firmware update
When updating the firmware, the L+ supply voltage must be applied to the module at the
start and during the firmware update.
See also
ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293)
3.2 Block diagram
Block diagram
Figure 3-1
10
Block diagram DI 8×NAMUR HF
DI 8xNAMUR HF digital input module (6ES7131-6TF00-0CA0)
Manual, 02/2014, A5E03894478-01