Parameter Data Record; Dependencies When Configuring With Gsd Files - Siemens SIMATIC ET 200SP Manual

Parameter data record

A.1

Dependencies when configuring with GSD files

When configuring the module with a GSD file, remember that the settings of some
parameters are dependent on each other, see the tables below.
Configuring with a PROFINET GSD file
The table lists the diagnostics information and its dependencies on the sensor types for
PROFINET.
Sensor type
NAMUR sensor
Single contact, unconnected
Single contact, connected with 10 kΩ
NAMUR changeover contact
Changeover contact, unconnected
Changeover contact, connected with
10 kΩ
Configuring with a PROFIBUS GSD file
The table lists the diagnostics information and its dependencies on the sensor types for
PROFIBUS.
Sensor type
NAMUR sensor
Single contact, unconnected
Single contact, connected with 10 kΩ
NAMUR changeover contact
Changeover contact, unconnected
Changeover contact, connected with 10 kΩ
DI 8xNAMUR HF digital input module (6ES7131-6TF00-0CA0)
Manual, 02/2014, A5E03894478-01
Missing Short-circuit
supply to ground
voltage L+
× ×
× -
× -
× ×
× -
× -
Missing Short-circuit
supply to ground
voltage L+
×
×
×
×
×
×
Diagnostics information
Wire break Chatter
error
× ×
- ×
× ×
× ×
- ×
× ×
Diagnostics information
Wire break
× ×
- -
- ×
× ×
- -
- ×
A
Changeover Inversion
error
- ×
- ×
- ×
× -
× -
× -
Changeover Inversion
error
- ×
- ×
- ×
× -
× -
× -
32