Delete User; Disable User; Enable User - Kaba 52 Operating Instructions Manual

Manager User Operations
These operations are only available in Single Mode and can only be performed by the
Manager User (User 1). All Manager User Operations involve management of User 2.
User 2 can have a lock access status of "Enabled" or "Disabled". If "Enabled", User 2
can open the lock. When User 2 is added to the lock, the default lock access status is
"Enabled". The Manager User (User 1) has the authority to change the lock access
status for User 2 and can temporarily "Disable" lock access for the user.
ADD USER 2
1. For self-powered lock, power
2. Press
3. Enter Manager User (User 1) combination.
Note: User 2 is added to the lock as "Enabled" with a factory combination of "50 25 50".
User 2 can change the User 2 combination while Enabled, but only the Manager User
(User 1) can change the lock access status.

DELETE USER 2

1. For self-powered lock, power
2. Press
3. Enter Manager User (User 1) combination.

DISABLE USER 2

1. For self-powered lock, power
2. Press
3. Enter Manager User (User 1) combination.
Note: If you try to disable User 2 when already disabled, you will get an error indication.

ENABLE USER 2

1. For self-powered lock, power
2. Press
3. Enter Manager User (User 1) combination.
Note: If you try to enable User 2 when already enabled, you will get an error indication.
. Press .
G
. Press .
G
. Press .
G
. Press .
G
the lock
G
R
G R
the lock
G R
G R
the lock
G R
G R
the lock
G R
G R