How To Create A New Route From A Point - Furuno TZT9 Operator's Manual

5. ROUTES
4. Select the next route point in the route.
Repeat this step to enter all route points. Each route point is numbered.
1st route point (starting point)
5. At the last route point, select [End Route] at the top right-hand corner of the screen
to complete the route. The flag mark disappears and the following window ap-
pears.
The route is automatically named. The default route name is "RTE" plus the date
(e.g. RTE 2012-03-01). Select [Save]. If necessary, select [Rename] to change
the route name. The route is saved to the routes list.
5.2.2

How to create a new route from a point

You can create a route from a point.
1. Select a point to display the pop-up menu.
2. Select [New Route]. The flag mark as below appears on the point.
3. Select the next route point in the route. A blue line with arrow runs between the
previous point and the next route point. The arrow points in the direction of route
flow.
4. Select the next route point in the route.
Repeat this step to enter all route points. Each route point is numbered.
Selected point (starting point)
5-2
1 1
2nd route point
A new route has been created under this name:
RTE 2012-03-01
Rename
1 1
2nd route point
2
Route leg
3rd route point
Cancel
Save
2
3rd route point
4
4th route point
3
4
4th route point
3