Furuno TZT9 Operator's Manual page 178

IP camera
You can change the nickname and IP address for an IP camera. Also, you can turn on
or off the PTZ (pan, tilt, zoom) function. Select [Camera] - [IP Camera 1] (or 2, 3, 4) of
the main menu.
IP Camera 1
NickName
IP Camera
PTZ Control
[NickName]: Enter (or change) the nickname (a maximum of 13 alphanumeric charac-
ters) with the software keyboard then select [Confirm].
[IP Camera]: Enter the IP address with the software keyboard then select [Confirm].
[PTZ Control]: Select the [ON] icon to turn on the PTZ function.
Axis Server 241Q
The axis server digitizes four analog video sources (IP cameras) and makes them
available on the network. Two axis servers are available: [Axis Server 241Q] and [Sec-
ond Axis Server 241Q]. Select [Camera] - [Axis Server 241Q] of the main menu.
Axis Server 241Q
Server 241Q
IP Server
Quad Mode
Input 1
NickName Input 1
Input 2
Input 3
Input 4
[Server 241Q]: Select the [ON] icon to receive the signal from an axis server 241Q.
[IP Server]: Enter the IP address with the software keyboard then select [Confirm].
[Quad Mode]: Select the [ON] icon to display the four images from an axis server 241Q
simultaneously.
[Input 1] (or 2, 3, 4): Select the [ON] icon to receive each signal from an axis server
241Q.
[NickName Input 1] (or 2, 3, 4): Enter (or change) the nickname (a maximum of 13 al-
phanumeric characters) with the software keyboard then select [Confirm].
9. CAMERA/VIDEO/FUSION-Link
IP Camera 1
172.31.200.3
172.31.200.7
Video 1
When selecting the
[ON] icon in [Input 1],
this menu item appears.
9-3