4-2
Connector Specifications
This section provides the Connector Specifications of the Box PC Without Operating System.
4-2-1
Power Connector Specifications
The power supply connector can be locked to prevent unintentional disconnection.
The connector can only be inserted the correct way.
The connector is a Phoenix Contact type SPC5/2-STCL-7.62 BK (1711708).
The Box PC provides protection against reverse polarity.
1
The pin layout represents the power connector on the Box PC.
Pin
1
24 VDC
2
0 VDC
Conductor isolation rating
Termination rating
Additional Information
• Refer to 5-4-3 Wire the Power Connector on page 5 - 36 for wiring details.
• Refer to 5-4-2 Ground on page 5 - 29 for grounding details.
NY-series Industrial Box PC Without Operating System User's Manual (W586)
2
Item
Description
Specifications
90°C
90°C
4 Specifications
4
4 - 13