Ny Monitor Link Cables - Omron NYB17-*100 SERIES User Manual

2 Hardware
2-9-7

NY Monitor Link Cables

The following table lists the recommended cables and connectors for the NY Monitor Link cable.
Maximum length
Manufacturer
Cable type
Category type
Cable sheath
Conductor pairs/size/type
Overall shielding
Pair shielding
Maximum outer diameter
Maximum bending radius of cable in a
fixed position
Maximum temperature for a cable in a
fixed position
RJ45 connectors
Additional Information
When making cables, connect the shield to the connectors at both ends.
NY Monitor Link Cable Clearance
The NY Monitor Link cable requires a minimum clearance from the connector entry to prevent exces-
sive strain on the connector and cable assembly.
The minimum clearance consists of the sum of:
• Connector length
• Maximum bending radius of cable in a fixed position
2 - 22
Application
Manufacturer
Partnumber
Connector length
NY-series Industrial Box PC Without Operating System User's Manual (W586)
Intra cabinet or
light industrial en- Inter cabinet
vironment
25 m 100 m
Lapp Lapp
2170196 2170614
Cat 6A Cat 7
Halogen free Halogen free
4 x 2 x AWG23/1 4 x 2 x AWG23/1
Aluminum foil Copper braid
Aluminum foil Aluminum foil
7.6 mm 7.7 mm
31 mm 31 mm
60°C 60°C
Stewart Connector Stewart Connector
SS39200-027 or SS39200-027 or
SS39200-030 SS39200-030
30 mm 30 mm
Inter cabinet and
harsh industrial
environment
100 m
Lapp
2170466
Cat 6A
Halogen free
4 x 2 x AWG22/1
Copper braid
Aluminum foil
9.0 mm
90 mm
80°C
Lapp
21700600 (T568A)
or 21700601
(T568B)
50 mm