Connectors; Power Connector; I/O Connector - Omron NYB17-*100 SERIES User Manual

2 Hardware
2-7

Connectors

This section gives an overview of the available connectors for the Box PC Without Operating System.
2-7-1

Power Connector

The power connector on the Box PC is used to supply 24 VDC power to the Box PC.
The power connector is supplied with the Box PC.
Additional Information
• Refer to 4-2-1 Power Connector Specifications on page 4 - 13 for specifications.
• Refer to 5-4-3 Wire the Power Connector on page 5 - 36 for wiring details.
• Refer to 5-5 Connect on page 5 - 42 for connection details.
2-7-2

I/O Connector

The I/O connector on the Box PC Without Operating System provides discrete signals with the follow-
ing functions.
• Input signal to the Box PC when a connected UPS switches to battery power.
• Input signal to the Box PC to perform a shutdown or power ON when the signal turns ON.
• Output signal from the Box PC to indicate the power status of the Box PC.
The I/O connector is supplied with the Box PC.
2 - 12
NY-series Industrial Box PC Without Operating System User's Manual (W586)