Table of Contents
Advertisement
5 Installation
5-3-8
Book Mount Procedure
Use the following procedure to mount the Box PC Without Operating System in the book orientation.
Additional Information
• Refer to 5-4-2 Ground on page 5 - 29 for grounding details.
• Refer to 2-9-1 Mounting Brackets on page 2 - 19 for the bracket model.
To mount the Box PC:
1
Mount the Bracket
the brackets. Tighten these screws with a torque of 0.5 N·m.
2
Mount the Box PC with the bracket in position.
• Drill the four holes at the location where the Box PC with bracket will be mounted.
Refer to 4-1-8 Bracket Specifications on page 4 - 12 for details.
• Position the Industrial Box PC with bracket in the mounting location.
5 - 26
A
to the Industrial Box PC
NY-series Industrial Box PC Without Operating System User's Manual (W586)
C
with the 6 Phillips screws
A
B
C
B
supplied with
Advertisement
Table of Contents
