Omron NYB17-*100 SERIES User Manual page 2

NOTE
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or other-
wise, without the prior written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information contained
in this manual is subject to change without notice. Every precaution has been taken in the preparation
of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is
any liability assumed for damages resulting from the use of the information contained in this publica-
tion.
Trademarks
•
Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan
and other countries for OMRON factory automation products.
•
Windows, Visual Basic and Visual Studio are either registered trademarks or trademarks of Micro-
soft Corporation in the USA and other countries.
•
Linux is a trademark or registered trademark of Linus Torvalds in Japan and other countries.
•
VxWorks is a trademark or registered trademark of Wind River Systems, Inc. in the USA and other
countries.
•
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation
GmbH, Germany.
•
ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA.
•
The SD and SDHC logos are trademarks of SD-3C, LLC.
•
Intel, the Intel Logo, Celeron, Intel Core and Wind River are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the USA and other countries.
Other company names and product names in this document are the trademarks or registered trade-
marks of their respective companies.