Record - Yealink EXP40 User Manual

Yealink EXP40 User Guide
If you leave this field blank, the LCD screen of the EXP40 expansion module will display the
default label "SMS".
Click Confirm to accept the change.
4.

Record

Call recording allows users to record calls. Normally, there are 2 main methods to trigger a
recording on a certain server. We call them record and URL record. Record is for the phone to
send the server a SIP INFO message containing a specific header. URL record is for the phone to
send an HTTP URL to the server. The server processes these messages and decides to start or
stop a recording.
You can configure an Ext key as the record key. Then you can record calls using the record
method by pressing the record key. For more information on URL record, refer to
page 31.
To configure an Ext key as the record key:
Click on Dsskey->Ext Key.
1.
In the desired Ext key field, select Record from the pull-down list of Type.
2.
Enter the desired value in the Label field or leave it blank.
3.
30
URL Record on