Yealink EXP40 Quick Reference Manual

You can speed up dialing the numbers which are frequently used or hard to remember by
pressing the speed dial key.
1. Click on -> .
2. In the desired DSS key field, select
3. Enter the desired number you want to dial out directly in the
4. Enter the desired value in the field.
5. Select the desired line from the pull-down list of
5. Click to accept the change.
You can connect to the operator or the secretary more quickly by pressing the intercom key in an
office environment .
1. Click on -> .
2. In the desired DSS key field, select
3. Enter the remote extension number in the
Shared Line
4. Enter the desired value in the field.
5. Select the desired line from the pull-down list of
5. Click to accept the change.
You can configure a DSS key as the line key. It performs the same as a hard line key.
1. Click on -> .
2. In the desired DSS key field, select
3. Select the desired line from the pull-down list of
4. Click to accept the change.
The BLF key allows you to monitor the status of the pre-defined number. You can also pick up
incoming calls of the monitored number.
1. Click on -> .
2. In the desired DSS key field, select
3. Enter the phone number or extension you want to monitor in the
4. Enter the desired value in the field.
Group Pickup
5. Select the desired line from the pull-down list of
6. Enter the directed call pickup code in the
7. Click to accept the change.
You can configure a DSS key as the group listening key. Then you are allowed to activate the
Speakerphone mode and Handset/Headset mode at the same time by pressing the group
Record
listening key.
1. Click on -> .
2. In the desired DSS key field, select
3. Enter the desired value in the field.
4. Click to accept the change.
LDAP is an application protocol for accessing and maintaining information services of the
distributed directory over an IP network. The IP phone can be configured to interface with a
corporate directory server that supports LDAP . You can configure a DSS key as the LDAP key.
If you press the LDAP key, the IP phone will download and display the LDAP entries on the LCD
screen.
1. Click on -> .
URL Record
2. In the desired DSS key field, select
3. Enter the desired value in the field.
4. Click to accept the change.
For more information, refer to the User Guide online at
c
Copyright 2013 YEALINK NETWORK TECHNOLOGY CO.,LTD.
from the pull-down list of .
field.
.
from the pull-down list of .
field.
.
from the pull-down list of .
.
from the pull-down list of .
field.
.
field.
from the pull-down list of .
from the pull-down list of .
www.yealink.com
EXP40