Transfer - Yealink EXP40 User Manual

If you leave this field blank, the LCD screen of the EXP40 expansion module will display the
default label "Forward".
Click Confirm to accept the change.
5.

Transfer

You can configure an Ext key as the transfer key. Then you can perform a Blind, Semi-Attended
or Attended Transfer by pressing the transfer key during a call.
To configure an Ext key as the transfer key:
Click on Dsskey->Ext Key.
1.
In the desired Ext key field, select Transfer from the pull-down list of Type.
2.
Enter the phone number you want to transfer the call to in the Value field or leave it blank.
3.
Enter the desired value in the Label field or leave it blank.
4.
Configuring the Yealink EXP40 Expansion Module
25