Url Record - Yealink EXP40 User Manual

If you leave this field blank, the LCD screen of the EXP40 expansion module will display the
default label "Record"
Click Confirm to accept the change.
4.

URL Record

You can configure an Ext key as the URL record key. Then you can record calls using the URL
record method by pressing the call record key.
To configure an Ext key as the URL record key:
Click on Dsskey->Ext Key.
1.
In the desired Ext key field, select URL Record from the pull-down list of Type.
2.
Enter the URL in the Value field (e.g., http://10.2.1.65).
3.
Enter the desired value in the Label field or leave it blank.
4.
Configuring the Yealink EXP40 Expansion Module
31