Basic Position Of The Machine Drive Unit; On Machines With Picodrive And Control Unit P41 Pd1; With Drive System Md-4-58-220-Ce - Pfaff 583 Instruction Manual

8

Basic position of the machine drive unit

.05
8 On machines with PicoDrive and control unit P41 PD2
.05.01
● Switch on the machine.
● Call up the parameter input by pressing the "scroll" key.
● To switch the function keys to input (LED in the TE key lights up), press the TE key.
● By pressing the corresponding +/- keys, select parameter "798" and service level C,
see Chapter Selecting the User Level in the separate Control Panel Instruction Manual.
● Select parameter "799" by pressing the corresponding +/- keys.
● Check whether the value is set at "7" and alter if necessary.
● By pressing the corresponding +/- key, select parameter "700"
● Sew a stitch by operating the pedal.
● Turn the balance wheel in the sewing direction until the descending needle is level with
the top edge of the needle plate.
● Conclude the adjustment of the sewing motor by pressing the "scroll" key
8

With drive system MD-4-58-220-CE

.05.02
● Press and hold button and switch on machine
● Parameter 176 is displayed.
● Call up parameter 181.
A B
● Call up input level.
S
● Sew a stitch with the pedal function.
● Turn the handwheel in rotational direction until the needle point (approaching from above)
is on the upper edge of the needle plate.
A
● Confi rm entry.
● Call up parameter 192.
A B
S
Call up input level.
D
Press button D+ to turn function "off".
S
Press button "S" to exit input.
Installation and commissioning
23