Switching The Machine On/Off; Basic Position Of The Machine Drive Unit; On Machines With Quick-Ecodrive And Control Unit P70Ed; On Machines With Quick-Picodrive And Control Unit P41 Pd-L - Pfaff 1525 Instruction Manual

Installation and commissioning
8

Switching the machine on/off

.04
● Switch the machine on (see Chapter 7.01, On/off switch).
8

Basic position of the machine drive unit

.05
8.

On machines with Quick-EcoDrive and control unit P70ED

05.01
● Switch on the machine.
● Press the TE/speed key twice to select the input mode.
● Select parameter "798" by pressing the corresponding +/- key, and select service level C,
● By pressing the corresponding +/- key select the parameter "799" (Selecting the machine
● Press the corresponding +/- key to set the value for the parameter at "3".
● By pressing the corresponding +/- key, select parameter "700".
● Sew a stitch by operating the pedal.
● Turn the balance wheel in the sewing direction until the descending needle is level with
● Conclude the adjustment of the sewing motor by pressing the TE/Speed key.
8.

On machines with Quick-PicoDrive and control unit P41 PD-L

05.02
● Switch on the machine.
● Call up the parameter input by pressing the scroll key.
● Press the TE key to switch the function keys to input function (LED in the TE key is
● Press the corresponding +/- keys to select parameter "798" and select the service level C,
● Select parameter "799" by pressing the corresponding +/- keys.
● Check whether the value is set at "5" and alter if necessary.
● Switch the machine off and then on again.
● "Pulley" appears on the display.
● Call up the parameter input by pressing the scroll key.
● Press the TE key to switch the function keys to input function (LED in the TE key is
● Press the corresponding +/- keys to select parameter "798" and select the service level C.
● Select parameter "800" by pressing the corresponding +/- keys.
● Check whether the value is set at "1" (balance wheel turns towards operator) and alter if
● Press the scroll key until "Pulley" appears on the display.
● If the pedal is operated, the control unit carries out a teach-in operation.
● The machine runs at low speed until the teach-in operation is completed. This operation
● After the teach-in operation, the "Pulley" disappears from the screen - display returns to
● Select parameter "700" by pressing the +/- keys.
● Sew one stitch by operating the pedal.
● Turn the balance wheel in the direction of rotation until the needle point, descending from
● Conclude the adjustment of the sewing motor by pressing the scroll key.
8 - 8
see Chapter Selecting the user level in the instruction manual for the control panel.
class).
the top edge of the needle plate.
illuminated).
see chapter Selecting the User Level in the separate instruction manual for the control
panel.
illuminated).
necessary.
cannot be interrupted.
standard.
above, is flush with the top edge of the needle plate.