Parameter List For Drive System Md-4-58-220-Ce - Pfaff 583 Instruction Manual

Care and maintenance
10

Parameter list for drive system MD-4-58-220-CE

.04.02
*
32
1 Speed max.
4 Speed for start backtackl
5
Speed for end backtack
46 Rotating direction of the motor
47
Selected machine class
61 Cutting speed 1
81 Needle position 6 (start cutting signal 2)
84 Needle position 5 (end cutting signal 1)
85 Needle position 9 (start thread tension
release/start thread catcher)
87 Tension release after thread lever position at t.d.c.
179
Needle position 2 (take-up lever raised)
181 Needle position 1 - needle lowered (192 = off)
210 Switch on angle for thread trapper
211 Switch off angle for thread trapper
236 Machine version
2 = 581 + 583
See Chapter 3 Specifi cations
Adjustment see Chapter 8.05 Basic position of the machine drive unit.
▲
50 - 9999
50 - 8000 1400
50 - 8000 1400
CW - CCW CW
0 - 101 62
50 - 500 220
0 - 360° 40°
0 - 360° 90°
0 - 360° 120°
0 - 1500ms 20ms
0 - 359° 83°
0 - 255 250
0 - 359° 20°
0 - 359° 90°
0 - 4 2