Controller Settings - Lennox V0STAT54P-2 Installation And Operation Instructions Manual

Centralized Controller Locks Controller
If a function of the indoor unit is locked by a
centralized controller (e.g. mode, tempera-
ture setpoint, swing, etc.), the V0STAT54P-2
controller will not be able to adjust that
locked function.
The function must be unlocked at the cen-
tralized controller before the local controller
can operate it.

Controller Settings

• Press and hold the Fan speed button and
the Mode button for 5 seconds to access
the controller settings.
• Use Table 3 to setup the controller.
• When in Settings mode:
• Press the Fan speed button to accept
the current setting parameters and pro-
ceed to the next setting.
• Press the Up-arrow and Down-arrow
buttons to adjust parameters.
• Press the Power button to restart control-
ler.
FAN SPEED
Figure 7. Controller Settings
11
Settings Number
(see table 3)
Settings
Settings
Parameter
MODE
Code