Controller Settings - Lennox V0STAT54P-2 Installation & Operation Instructions

Centralized Controller Locks Controller
If a function of the indoor unit is locked by a centralized controller (e.g. mode, tempera-
ture setpoint, swing, etc.), the V0STAT54P-2 controller will not be able to adjust that
locked function.
The function must be unlocked at the centralized controller before the local controller
can operate it.

Controller Settings

• Press and hold the Fan speed button and the Mode button for 5 seconds to access
the controller settings.
• Use Table 3 to setup the controller.
• When in Settings mode:
• Press the Fan speed button to accept the current setting parameters and proceed
to the next setting.
• Press the Up-arrow and Down-arrow buttons to adjust parameters.
• Press the Power button to restart controller.
Settings Number
(see Table 3)
FAN SPEED
Figure 7. Controller Settings
11
Settings
Code
Settings
Parameter
MODE