MOTO GUZZI GRISO 8V - 1200 Service Station Manual page 87

GRISO 8V - 1200
•
Working from both sides, place the in-
let manifold fitting a new gasket be-
tween the manifold and head.
•
Fasten the inlet manifold with the three
screws.
•
Connect the stand sensor connector
and fix it to the chassis with new
clamps.
•
Place the oil vapour union and tighten
the two fixing screws.
•
Insert the oil breather pipe and fasten
it with a new clamp.
Engine from vehicle
ENG VE - 87