KANEXPRO
8. Firmware Upgrade through USB port
The Matrix Switcher boasts a USB port for firmware upgrade on the rear panel.
Preparation: copy the upgrade software DfuSe Demonstration& upgrade file (.dfu) to
control PC.
Steps to upgrade the device:
Step1. Connect the control PC to the USB port of the Matrix Switcher.
Step2. Reboot the Matrix Switcher to enter upgrade mode. Press and hold button 2& 3
when rebooting. The power indicator will keep blinking in upgrade mode.
Step3. Double-click the icon of upgrade software DfuSe Demonstration (see the figure
below).
It will pop up the following window:
Figure Error! No text of specified style in document.-2 Upgrade firmware via DfuSe
32 |
P a g e
Figure Error! No text of specified style in
document.-1 Icon of DfuSe Demonstration
HDMX44-18G