Table of Contents
Advertisement
KANEXPRO
6. RS232 Control
6.1 Installation/uninstallation of RS232 Control Software
Installation Copy the control software file to the computer connected with the
Matrix Switcher.
Uninstallation Delete all the control software files in corresponding file path.
6.2 Basic Settings
Firstly, connect the Matrix Switcher with necessary input devices and output devices.
Then, connect it with a PC installed RS232 control software. Double-click the software
icon to run this software.
Here we take the software CommWatch.exe as example. The icon is showed as
below:
The interface of the control software is showed as below:
Parameter
Set the parameters (baud rate, data bit, stop bit and parity bit) correctly to ensure
13 |
P a g e
Figure 6- 2 Control Interface of
Figure 6- 1 Icon of
Monitoring area,
indicates whether the
command sent works.
Command Sending
CommWatch
HDMX44-18G
CommWatch
Advertisement
Table of Contents
