Table of Contents
Advertisement
KANEXPRO
HDMX44-18G
In the above interface, turn on the Front Panel to lock all buttons of machine, they
cannot be operated.
7.4 TCP/IP Port Configuration
IP address, subnet mask, and Gateway of the Matrix Switcher can be modified via GUI
from the above description, but beyond that users can configure the IP port, including
IP reset, password reset, and IP module firmware update on the WebServer.
Type the designed website (Default: 192.168.0.178:100, changeable) in your browser.
Enter correct username and password to log in the WebServer:
Username: admin; Password: admin
Here is the main configuration interface of the WebServer:
Figure 7- 16 TCP/IP Configuration
7.5 GUI Update
GUI for the Matrix Switcher supports online update in http://192.168.0.178:100. Type
the username and password (the same as the GUI log-in settings, modified password
will be available only after rebooting) to log in the configuration interface. After that,
click Administration at the source menu to get to Upload Program as shown below:
Figure 7- 17 GUI Update
31 |
P a g e
Advertisement
Table of Contents
