Device Connectors - Lancom L-310agn Wireless Manual

LANCOM L-300 Access Point series
Chapter 2: Installation
The following can be displayed for WLAN data:
Green
Red
Red
WPS Messages via the WiFi Protected Setup (WPS). This function is not yet available
with early shipments. Please download the latest firmware and the associated
user manual from www.lancom.de.
ETH LAN connector status:
Off
Green
Green
2.4

Device connectors

The connections and switches of the router are located on the back panel:
LANCOM L-305agn
Wireless and
LANCOM L-310agn
Wireless
³
·
»
¿
´
²
¶
28
Flickering
Flickering
Blinking
On (perma-
nently)
Flickering
not available on LANCOM L-305agn
DC12V ETH4 ETH3
»
Voltage switch
Connection for the included power adapter
Switch with four 10/100Base-Tx connections
USB connection
Serial configuration port
ISDN/S port
0
ADSL port
TX data traffic.
Error in wireless LAN (TX error, e.g. transmission error
due to a poor connection)
Hardware error in the WLAN module
No networking device attached
Connection to network device operational, not data traffic
Data traffic
ETH2 ETH1 USB
¿
Config (COM) ISDN S ADSL Reset
0
´ ² ¶ º