The Connectors - Lancom L-54g Wireless Manual

LANCOM L-54g Wireless - LANCOM L-54ag Wireless - LANCOM L-54 dual Wireless
Chapter 2: Installation
green
green
orange
LAN Data (only Indicating data traffic on the LAN interface:
LANCOM L-
54g Wireless
off
and LANCOM
L-54ag
green
Wireless)
2.3.2

The connectors

With your LANCOM Access Point the connectors and switches of the base sta-
tion are located on the back panel:
LANCOM L-54 dual
Wireless
LANCOM L-54g
Wireless
LANCOM L-54ag
Wireless
³
·
»
¿
18
regularly blinking
on with short inter-
ruptions
flickering
³ · »
·
Aux connector for (second) WLAN module. Diversity antennas are con-
nected to the Aux connectors.
Connection for the included power adapter.
Aux connector for (first) WLAN module.
(Second) 10/100base-Tx for the connection to the LAN. 10Mbp- or
100Mbp connections are supported. The used transfer speed will auto-
matically be identified (autosensing).
The LAN connector of the LANCOM Access Point supports the Power-
over-Ethernet standard (PoE). You find further information about operat-
connection establishing DSL over LAN
DSL over LAN active (e.g. PPPoE via LAN access)
network device connected; transfer rate 100 Mbps (The
device cannot function as directed, since a 10 Mbps fast
connection is too slow for a 54 Mbps fast WLAN data
transmission in the LAN.)
no data traffic
data traffic
¿ ´ ² ¶ º ¾