Access Points In Relay Mode - Lancom L-310agn Wireless Manual

LANCOM L-300 Access Point series
Chapter 5: Advanced wireless LAN configuration
In the point-to-point configuration, select the identification by station name
and enter the name of the corresponding station.
5.3.6

Access points in relay mode

Access points equipped with two wireless modules can be used to establish
wireless bridges across multiple stations. Each wireless module is configured
as a 'Master' and then 'Slave' in turn.
72
LANconfig: Wireless LAN
WEBconfig: Setup
General Point to point partners
Interfaces WLAN interpoint peers