Configuration & Operation; Front Panel; Rear Panel - Hall Research Technologies SC-1080R User Manual

Multi-Format Switcher & Scaler
3.0 Configuration & Operation
The video scaler accepts both TV and PC inputs and scales them to your
desired high resolution format output. The TV inputs are composite video
(CV), YPbPr input (3 RCA connectors), PC (HD15) and HDMI™.

3.1 Front Panel

Power Button:
IR Receiver:
Inputs Buttons: Press to select the appropriate input.
Menu:
▲/▼ Buttons:
Enter:

3.2 Rear Panel

IR DETECT:
Service USB:
RS-232:
LAN:
4
Press to switch the device ON. The LED will illuminate
when the device is ON.
Receives the IR signal from the remote control included
Press to enter the On-Screen Display (OSD) menu.
Navigate up and down in the OSD menu.
Press to confirm an option in the OSD.
Connect an IR detector to this jack. The pin configuration
is Tip:Data, Ring:3.3V, Sleeve-GND. Hall Research's IR
receiver cable CIR-DET-D1 is included.
Reserved for firmware upgrade. The slot can be used to
power a USB device. You can use this port for powering
USB powered devices such as chrome-cast etc.
Connect to a PC/Laptop or RS-232 control system to send
the serial commands using a straight-thru DB9 cable to
control the device. Pin 2 - TX and Pin 3 – RX.
The RJ45 port is reserved for Telnet or WebGUI control.
Connect to an Ethernet link with RJ45 cable.