Hall Research Technologies SC-1080R User Manual page 7

DC 5V:
INPUTS
Video (CV):
HDMI inputs:
VGA inputs:
L/R:
YPbPr+L/R:
CV+LR:
Use only the 5V 3A DC power input (center positive 2.1
mm jack) supplied with the unit to power ON the device.
Use a Composite video cable to connect the composite
video output of the source equipment to the connector
labeled "CV" on the back of the Video Scaler. The format
can be NTSC or PAL. This channel accepts stereo audio
input via (2) RCA connectors.
Use an HDMI™ cable to connect the HDMI™ output of the
source equipment to the device. This channel accepts
digital audio input via HDMI or stereo audio via a 3.5mm
audio jack (TRS – Tip, Ring, and Sleeve).
Connect the source computer's VGA output signal to the
HD15 connector labeled "PC" on the device. This channel
accepts stereo audio input via a 3.5mm audio jack (TRS –
Tip, Ring, and Sleeve).
Connect to source's L/R output with 3.5mm mini-jack for
selected VGA or HDMI™ inputs.
Use a 3 RCA-to-3 BNC YPbPr cable to connect the YPbPr
output of the source equipment to the device. The format
can be NTSC or PAL. This channel accepts stereo audio
input via (2) RCA connectors.
Connect to a composite video source such as a DVD
player for both audio and video signal conversion.
Model SC-1080R
5