Setting And Using Features; Setting The Paper Size - Xerox WorkCentre 4118 Quick Use Manual

quick_use.book Page 21 Thursday, March 2, 2006 9:38 AM

Setting and Using Features

Setting the Paper Size

After loading paper in the paper trays, you will need to set the default Paper
Size. Use the following instructions to set the default Paper Size for each
tray.
1
Press the [Machine Status]
key on the Control Panel.
Select [Machine Setup] using the Navigation Keys and press [Enter].
2
The display shows [Tray 1 Size] on the bottom line.
Press [Enter].
Use the Navigation Keys to select the Paper Size required and press
3
[Enter] to save the selection.
Repeat the procedure for [Tray 2 Size] if available, and [Bypass Size].
Press [Menu/Exit] to exit each menu level and return to standby mode.
4
21
Enter Machine
Status