*4
When Pr. 59 Remote function selection = "1" or "2", the functions of the RL, RM and RH signals are changed as given
in the table.
*5
When Pr. 270 Stop-on contact/load torque high-speed frequency control selection = "1", functions of RL and RT signals
are changed as in the table. (The setting is available for the FR-A700 series.)
REMARKS
The values of each bit, "0" and "1," indicate "OFF" and "ON."
6.2.2
Set frequency
The set frequency can be set in 0.01Hz increments.
Bit
0 to 15
0.00Hz to 400.00Hz
Example:
If you want to set 120.00Hz, set 12000, which is the value multiplied by 100.
REMARKS
Regardless of the Pr. 37 Speed display setting, the value is always set in frequency (Hz).
Range
CYCLIC TRANSMISSION
Unit
0.01Hz
6
51