Input To The Inverter From The Network - Mitsubishi Electric FR-F720-55K Instruction Manual

5.1.2

Input to the inverter from the network

Main items which can be commanded from the network to the inverter and their descriptions are explained
below. ( : with function,
Item
Sets the control input command such as
Run command forward rotation signal (STF) and reverse
rotation signal (STR).
Frequency setting Sets the running frequency of the inverter.
Parameter write * Sets parameters of the inverter.
Faults history batch
Clears the fault of the inverter.
clear
* Parameter writing is available only for the inverters with the SERIAL on page 5. Parameters can be written while
the X12 signal (Bit11), which gives operation commands through FL remote communication, is ON.
REMARKS
• Refer to the inverter manual for functions controllable from the network in each operation mode.
: without function)
×
Description
FL REMOTE COMMUNICATION FUNCTION
Cyclic
Transmission
×
×
Message Refer to
Transmission Page
×
49
×
51
72
76
39
5