Mitsubishi Electric FR-F720-55K Instruction Manual page 37

STF signal
STR signal
RL signal
RM signal
Operation
command RH signal
through FL
RT signal
remote
X12 signal
communication
MRS signal
PU/NET signal
*1
Error reset
*1 This setting and signal are for the inverters with the PU/NET operation switchover (X65 signal) specification.
(Refer to page 3)
*2 This setting and signal are for the inverters with the PU operation interlock (X12 signal) specification. (Refer to page 5)
*3 Functions of "RES terminal (X65 signal) of external terminal" and "FL remote communication control input
command (PU/NET signal)" are the same.
[Explanation of table]
NET :Control from network is only valid
Combined :Operation from either external terminal or communication is valid.
⎯
:Operation from either external terminal or computer is invalid.
Compensation :Control by signal from external terminal is only valid if Pr. 28 Multi-speed input compensation setting is "1".
CAUTION
• The settings of Pr. 338 Communication operation command source and Pr. 339 Communication speed command source
are invalid when used with the FR-A7NF.
Operation command
Forward rotation command
Reverse rotation command
Low-speed operation command
Middle-speed operation command
High-speed operation command
Second function selection
PU operation interlock
*2
Output stop
PU/NET operation switchover
Error reset
INVERTER SETTING
Operation valid
location
NET
NET
NET
NET
NET
NET
NET
NET
NET
*3
NET
Remarks
—
—
Pr. 59 = "0"
(multi-speed)
Pr. 59 = "1, 2" (remote)
—
—
—
—
—
4
31