Lincoln Electric MAXsa 10 Operator's Manual page 20

Accessing the Setup Menu
1. Mode Select Panel (MSP)
2. Setup Menu Indicator
3. Right Button
4. Control Knob
5. Left Button
1. ACCESS
To access the Setup Menu, Press the Left Button and
Right Button simultaneously. The Setup Menu Indicator
will light and the lower display will read as shown below.
Note: The Setup Menu cannot be accessed during
English
welding, or if a fault is displayed. To resume welding,
exit the Setup Menu.
2. PREFERENCE SELECTION
Scroll through the Preference list by rotating the Control
Knob. Press the Right Button to edit the selected
preference.
3. PREFERCE CHANGE
Scroll through the preference options by rotating the
Control Knob. Change the preference setting by
pressing the Right Button.
To cancel, press the Left Button.
4. EXIT
To exit the Setup Menu, press both buttons
simultaneously or select P.0 and press the Left Button.
Sixty seconds of inactivity will automatically exit the
Setup Menu.
Note: If a product is missing any of the preference
options listed below, a software update may be needed
from www.powerwavesoftware.com.
17 English