Safety; Safety Notices; Danger Notices; World Trade Safety Information - IBM zEnterprise EC12 Installation Manual

For physical planning 2827 all models gc28-6914-01 level 01f
Table of Contents

Advertisement

Safety

Safety notices

Safety notices may be printed throughout this guide. DANGER notices warn you of conditions or
procedures that can result in death or severe personal injury. CAUTION notices warn you of conditions
or procedures that can cause personal injury that is neither lethal nor extremely hazardous. Attention
notices warn you of conditions or procedures that can cause damage to machines, equipment, or
programs.

Danger notices

DANGER:
Heavy equipment — personal injury or equipment damage might result if mishandled.
(D006)

World trade safety information

Several countries require the safety information contained in product publications to be presented in their
translation. If this requirement applies to your country, a safety information booklet is included in the
publications package shipped with the product. The booklet contains the translated safety information
with references to the US English source. Before using a US English publication to install, operate, or
®
service this IBM
product, you must first become familiar with the related safety information in the
Systems Safety Notices, G229-9054. You should also refer to the booklet any time you do not clearly
understand any safety information in the US English publications.

Laser safety information

®
All System z
models can use I/O cards such as FICON
Channel-3 (ISC-3), or other I/O features which are fiber optic based and utilize lasers (short wavelength
or long wavelength lasers).

Laser compliance

All lasers are certified in the US to conform to the requirements of DHHS 21 CFR Subchapter J for Class
1 or Class 1M laser products. Outside the US, they are certified to be in compliance with IEC 60825 as a
Class 1 or Class 1M laser product. Consult the label on each part for laser certification numbers and
approval information.
CAUTION: Data processing environments can contain equipment transmitting on system links with
laser modules that operate at greater than Class 1 power levels. For this reason, never look into the
end of an optical fiber cable or open receptacle. (C027)
CAUTION: This product contains a Class 1M laser. Do not view directly with optical instruments.
(C028)
© Copyright IBM Corp. 2012, 2014
®
, Open Systems Adapter (OSA), InterSystem
Level 01f
v

Advertisement

Table of Contents
loading

Table of Contents