Removing and installing components
This section provides detailed information on how to remove or install the components from your computer.
Topics:
•
Recommended tools
•
Back cover
•
Expansion card
•
Coin cell battery
•
Front Bezel
•
Speaker
•
Intrusion switch
•
Hard drive and optical drive module
•
Storage
•
Optical drive
•
M.2 PCIe SSD
•
Heat sink assembly
•
Processor
•
Memory module
•
SD card reader
•
Power supply unit
•
Power switch
•
System board
Recommended tools
The procedures in this document require the following tools:
● Small flat blade screwdriver
● Phillips # 1 screwdriver
● Small plastic scribe
Back cover
Removing cover
1. Follow the procedure in
Before working inside your
2. To release the cover:
a. Loosen the captive screws that secure the cover to the computer [1].
b. Slide the cover toward the back of the computer [2].
8
Removing and installing components
computer.
2
Need help?
Do you have a question about the OptiPlex 3050 Small Form Factor and is the answer not in the manual?
Questions and answers