Table of Contents
Advertisement
2. Lid snaps are designed to provide enough force to compress the
o-ring for a proper seal. Keep firm pressure against the lid snap
while lifting it away.
3. Repeat with remaining lid snaps.
4. Remove the housing back.
Inserting the Camera
1. Remove any lanyard or neck strap which may be attached to the
camera.
2. Orient the Gear Ring with the foam strips on top and bottom and
the white dot at the top center. Attach the Gear Ring to the camera
by gently pressing it onto the camera's Aperture Ring. The front of
the Gear Ring should be flush with the front of the Aperture Ring.
3. Remove the Camera Mounting Plate from the housing.
Lid Snap Lock
Lumix
L
9
Advertisement
Table of Contents
