Inserting The Camera - Ikelite DMC-ZS100 Quick Start Manual

2. Lid snaps are designed to provide enough force to compress the
o-ring for a proper seal. Keep firm pressure against the lid snap
while lifting it away.
3. Repeat with remaining lid snaps.
4. Remove the housing back.

Inserting the Camera

1. Remove any lanyard or neck strap which may be attached to the
camera.
2. Check to see whether the camera's lens will fit through the port
opening of the housing.Remove the camera mounting plate from
the housing.
Mounting screw
Mounting
Tray
3. Line the mounting screw up with the camera's tripod socket. Use
a coin or flat head screwdriver to tighten the mounting plate to the
camera.
8
BOTTOM
Lid Snap Lock
Camera tripod
socket
FRONT
SIDE