Inserting The Camera - Ikelite 6116.15 Instructions Manual

2. Lid snaps are designed to provide enough force to compress the
o-ring for a proper seal. Keep firm pressure against the lid snap
while lifting it away.
3. Repeat with remaining lid snaps.
4. Remove the housing back.

Inserting the Camera

RX100 III IMPORTANT NOTE: If using the Sony RX100 III model
camera, add the small 1/16" thick rubber washer (included in box) to
the rear housing dial. Remove the adhesive backing on the washer
before application.
1. Remove any lanyard or neck strap which may be attached to the
camera.
2. Remove the camera mounting plate from the housing.
Lid Snap Lock
9