Placing The Dislodged Leader Pin Into The; Rewinding The Tape Into The Cartridge - IBM TS3500 Introduction And Planning Manual

Figure 57. Placing the dislodged leader pin into the correct position.. The cartridge door is open, showing the leader
pin out of position
5. To rewind the tape, insert the cartridge manual rewind tool (see 1 in
Figure 58. Rewinding the tape into the cartridge
6. Remove the rewind tool by pulling it away from the cartridge.
2
1
Figure 58) into the cartridge's hub 2 and turn it clockwise until the tape
becomes taut.
3
1
2
Chapter 5. Using 3592 tape drive media
191