Delivery Route; Delivery And Subsequent Transportation Of The Equipment - IBM TS3500 Introduction And Planning Manual

Delivery route

This section defines the conditions of the route by which the TS3500 Tape Library
will be delivered.
Check the delivery route that the library must travel from your loading dock to the
installation location. Ensure that the library will fit through all doors, hallways,
and elevators.
You must remove the library from the pallet and place it at the final location before
you call your IBM Service Representative to arrange for the installation. Refer to
the instructions on the shipping carton for correct unpacking procedures.

Delivery and Subsequent Transportation of the Equipment

> 500 lbs.
Use Only
Professional Movers!
Only professional movers or riggers should transport the equipment. The customer
should prepare his environment to accept the new product based on the
installation planning information provided, with assistance from an IBM
Installation Planning Representative (IPR) or IBM-authorized service provider. In
anticipation of the equipment delivery, the final installation site should be prepared
in advance such that professional movers or riggers can transport the equipment to
the final installation site within the computer room. If, for some reason, this is not
possible at the time of delivery, the customer will need to make arrangements to
have professional movers or riggers return to finish the transportation at a later
date. The customer is also responsible for using professional movers or riggers in
the case of equipment relocation or disposal. The IBM-authorized service provider
will only perform minimal frame repositioning within the computer room, as
needed, to perform required service actions.
(> 227 kg. )
Use Only Professional Movers!
especializado
Chapter 2. Physical planning specifications
101