Section 13 - Installation & Connection; Definition; Safety Regulations - Lennox MiniAir 10 Installation, Operating And Maintenance Manual

4 – I
S
ECTION NSTALLATION

4.1 Definition

CLIENT– The client is the person, activity or the society, that has bought or hired the apparatus, and intends to utilise the
machinery for its intended use.
USER / OPERATOR – The User or Operator, is the actual person that has been authorised by the client to utilise the
apparatus.
TECHNICIAN – Defined as the person who has followed a relevant/specific course of study, and so is able to understand
the dangers derived from the use of the apparatus, and in turn, due to this, are capable of solving major dilemmas.

4.2 Safety Regulations

The Manufacturer declines any responsibility for
failure to respect the Safety Regulations, and the
prevention as described below.
Furthermore, the manufacturer
responsibility for damage caused by the improper
use of the unit and/or modifications carried out
without proper authorisation.

Qualified personnel must carry out the installation.

During the installation operation, use protective clothing, for example: glasses, gloves, etc. as indicated by
686/89/CEE and successive regulations.

During the installation operate in absolute security, pollution free air and in an area free of obstructions.

Respect the regulations in force in the country in which the apparatus is being installed. Specifically relative to
its use, and to the disposal of packing and products used for the cleaning and maintenance of the unit. Respect
the recommendations given by the producers of such products.

Before placing in function the unit, check the perfect connection of the various components and the internal
parts of the system.

Avoid at all costs human contact with moving parts and contact with the parts themselves.

Do not commence with servicing or cleaning of the unit, before the unit has been disconnected from the
main supply.

The maintenance and the substitution of damaged or consumed parts must be carried out only by specialised
personnel, following the indications found within this manual.
IOM / MINIAIR-0507
& C
ONNECTION
declines any
Min 400 mm
Min 100 mm
7