Table of Contents
Advertisement
3 – I
NSTALLATION
Possible positioning
The horizontal configuration only is possible for these units; possible airflow deviations to 90° can be by special inlet or outlet
plenum.
4 – T
RANSPORTATION
Packaging
Each unit is put on bench and protected with cellophane film; the protection must remain intact until the moment of
installation.
The materials that are not mounted for technical motives are supplied in fitted packing fixed externally or internally to the
unit.
Moving & transportation
For the lifting and transportation of the unit, use adequate equipment, according to the 89/391/CEE regulations and further
modifications.
Each individual unit weight is listed in this manual.
While moving,try to avoid rotation without control.
Checklist
Upon reception of the unit, we suggest that a complete control is carried out, to verify that the unit is intact and complete,
and no damage has been sustained during transport. Any eventual damage revealed must be communicated to the carrier,
demonstrating the reserve clause within the transport documents, specifying the type of damage.
Storing
In case of long term storage, the apparatus must be kept free from dust, rain, water and away from areas susceptible to heat
and vibration.
The Manufacturer declines any responsibility for any damage as a result of negligence or lack of protection from
atmospheric agents.
5 – I
NSTALLATION
Definitions
CUSTOMER – The Customer is the person, activity or the society, that has bought or hired the unit, and intends to utilise the
machinery for its intended use.
USER / OPERATOR – The User or Operator is the actual person that has been authorised by the Customer to utilise the
unit.
QUALIFIED PERSONNEL - Defined as the person who has followed a relevant specific course of study, and so is able to
understand the dangers derived from the use of the machinery, and in turn, due to this, are capable of solving major
dilemmas.
MINIAIR-IOM-0310-E
C
ONFIGURATIONS
& C
ONNECTION
3
Advertisement
Table of Contents
