Table of Contents
Advertisement
To remove filter, dis-assemble the guides and extract filter.
For the cleaning, utilize a vacuum cleaner or wash with normal detergent and warm water, allow to dry well. Remember
to assemble the filter before operating the unit.
16.1.2 Recuperator Checklist
Verify that the plate exchanger does not demonstrate signs of impurity, as this may lower significantly its efficiency. It is
possible to dismantle the recuperator from below, removing the condensation drip tray.
Unscrew the plugs 1, remove the tray and extract the recuperator pack
16.1.3 Condensation discharge Checklist
Remove side panel and clean, if necessary, the dirt and impurities that have formed in the condensation tray. Also check
the efficiency of the siphon.
16.1.4 Water coil Checklist
Check that the coil exchanger (optional ) is clean and in perfect state to guarantee the normal levels of performance.
16.2 Yearly maintenance
Check that all the electrical equipment, in particular the fixing of the electrical connections.
Check the tightness of all nut, bolts, flanges and hydraulic connections that the vibrations of the machine may have
loosened.
36
IOM / MINIAIR-0507
Hide quick links:
Advertisement
Table of Contents
