Triton T300si Installation And Operating Instructions Manual page 30

Fig.
remove
Top view
wall
Fig.
T300si wireless remote electric shower
Bottom View
remove
note: Deviations from the designated entry
points will invalidate product approvals.
If a bottom surface entry is required for the
mains cold water then the necessary hole will
need to be cut out in the trimplate and cover
(Fig.).
If a surface cable entry from the top is required
then the relevant hole in the backplate will need
to be cut out (Fig.0).
Hook the backplate over the top screw and fit
the bottom fixing screw into position.
DO nOT fully tighten the screws at this stage,
as the fixing holes are elongated to allow for
out of square adjustment after the plumbing
connections have been completed.