Monitor/Test; X/Y Monitor/Test - Mitsubishi QJ71MT91 User Manual

8 UTILITY PACKAGE (GX Configurator-MB)

8.6 Monitor/Test

Switch 1
Intelligent
function
Switch 2
module switch
setting status
Switch
3, 4
Module READY
Watch dog timer error
8 - 17
[Monitor/Test Purpose]
From this screen, start the monitoring or test of the operating status, I/O signals,
parameter setting status, automatic communication status, error log,
communication status of the QJ71MT91 and perform PING test.
[Operating procedure]
Select monitor/test module screen
"Module model name"
*: Enter the start I/O No. in hexadecimal.
The screen can also be started from System monitor of GX Developer Version 6
or later.
Refer to the GX Developer Operating Manual for details.
[Monitor/Test Screen]
[Monitor/Test Items]
Monitor/Test Items
Operation mode setting status
Basic parameter starting method
Communication MODBUS
condition setting parameter starting method
status
Online change enable/disable
Send frame specification
Local station IP address setting status
"Start I/O No. *"
Monitor/Test
device assignment
R
MELSEC-Q
"Module type"
Buffer memory Reference
address section
0C00
H
(3072)
0C01
H
Section 6.6
(3073)
0C02 to 0C03
H H
(3074 to 3075)
Section 11.1
8 - 17