Mitsubishi QJ71MT91 User Manual page 24

2 SYSTEM CONFIGURATION
2 - 3
(2) Support of the multiple CPU system
When using the QJ71MT91 in a multiple CPU system, refer to the QCPU User's
Manual (Multiple CPU System) first.
(a) Compatible QJ71MT91
The function version of the first released QJ71MT91 is B, and it supports
multiple CPU systems.
(b) Intelligent function module parameters
Write intelligent function module parameters to only the control CPU of the
QJ71MT91.
(3) Supported software packages
Relation between the system containing the QJ71MT91 and software package is
shown in the following table.
GX Developer is required to start up the system that uses the QJ71MT91.
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Q02PH/Q06PHCPU
Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU Redundant system
Q13UDH/Q26UDHCPU
Q03UDE/Q04UDEH/
Q06UDEH/Q13UDEH/
Q26UDEHCPU
Q02U/Q03UD/Q04UDH/
Q06UDHCPU
When mounted to MELSECNET/H remote I/O
station
1: Refer to Section 2.3 for the accessible range of GX Developer.
Single CPU system Version 7 or later
Multiple CPU system Version 8 or later
Single CPU system Version 4 or later
Multiple CPU system Version 6 or later
Single CPU system
Version 8.68W or later
Multiple CPU system
Single CPU system
Version 7.10L or later
Multiple CPU system
Version 8.45X or later
Single CPU system
Version 8.62Q or later
Multiple CPU system
Single CPU system
Version 8.68W or later
Multiple CPU system
Single CPU system
Version 8.48A or later
Multiple CPU system
Version 6.01B or later Version 1.00A or later
MELSEC-Q
Software version
GX Developer 1 GX Configurator-MB
Version 1.00A or later
Version 1.08J or later
2 - 3