Mitsubishi QJ71MT91 User Manual page 133

8 UTILITY PACKAGE (GX Configurator-MB)
8 - 7
(2) Data created with the utility package
The following data or files that are created with the utility package can be also
handled in GX Developer. Figure 8.1 shows respective data or files are handled
in which operation.
<Intelligent function module parameter>
(a) Initial settings and auto refresh settings are saved in an intelligent function
module parameter file in a project created with GX Developer.
Project
Program
Parameter
(b) Steps 1) to 3) shown in Figure 8.1 are performed as follows:
1) From GX Developer, select:
[Project]
2) On the intelligent function module selection screen of the utility, select:
[Intelligent function module parameter]
parameters]
3) From GX Developer, select:
[Online]
parameter"
Alternatively, from the intelligent function module selection screen of the
utility, select:
[Online]
PLC parameter
Network parameter
Intelligent function module parameter
[Open project]/[Save]/[Save as]
[Read from PLC]/[Write to PLC]
[Read from PLC]/[Write to PLC]
MELSEC-Q
[Open parameters]/[Save
"Intelligent function module
8 - 7