Indoor Unit
1.10 Removal of
Procedure
Step
1. Removing the drip proof
plate
1
Dismount the drip proof
plate (right) by
removing the 2 screws.
2
Unhook the fan motor
wire harness.
Remove the 2 screws
3
of the fan motor fixing
plate.
166
Fan Rotor
Warning
Be sure to turn off all power supplies at least 10 min. before
disassembling work.
Procedure
SiBE04-824
Points
Preparation
Remove the heat exchanger
according to the "Removal
of Heat Exchanger."
Removal Procedure